filter air bandung murah

Effective Ways to Overcome Iron and Manganese in Water 

 

We will discuss about the features and how to effectively cope with iron and manganese in the water. In everyday life there are some environmental concerns because the water contains iron and manganese.

 

levels of iron and manganese in water is a hazard to health. If iron and manganese that are natural water, it can cause discomfort, stains, and other problems Because iron and manganese are chemically the same, those who cause the same problems. Iron will cause yellow brown stains on laundry, porcelain, dishes, utensils, and even glassware. Manganese acts in the same way but the cause stains brownish black. Soap and detergent does not remove this stain, and the use of bleach will add dirt. Effect of iron (Fe) high and manganese (Mg): For households, the house floor and the walls of the tub will be red if exposed to water continuously. Besides clothing will be red, yellow if used for washing. Iron and manganese will settle in your plumbing, pressure tank, water heater, etc. This will reduce the flow and pressure of water. Accumulation of iron and manganese will be economic problems if the pipes and the equipment must be replaced. Energy would be more wasteful, because of the extra energy required to pump through pipelines that narrowed due to deposition of iron or manganese. Effect of iron for health: The human body needs minerals and iron. It needs to be underlined. Try to notice any manufacturers of dairy products for baby racing contest declare that their products contain iron.

 

The characteristics of water containing iron (Fe) and manganese (Mg):

1. water Odor 

2. The Murky Water 

3. Water Potential yellow precipitate (iron levels), a black precipitate (manganese Substances)

4. The water there is a layer of oil on top of it (iron levels)

5. The water came out yellow (high iron levels) 

6. The water came out clear after settling some long turns yellow (low iron levels)

 How to cope with water containing iron (Fe) and manganese (Mg) in the household

 1. Aeration Fe can be removed from water by oxidation to Fe (OH) 3 is not soluble in water, and then followed by precipitation and filtration through a filter tube. The oxidation process is done by using commonly called aeration air is by way of the air entering the iron content in the water effect settles down so kotoran2nya attached to the tank. Kelemahanya maybe we would often drain the water reservoir so that dirt does not get into the sludge pipe installation. 

2. Sedimentation Sedimentation is the deposition of solid particles suspended in a liquid / liquid due to gravity (gravity naturally). Sedimentation can take place on the lake where the water is perfectly still or a water container that is made such that the water in dalamya rest. Basically the process is dependent on the influence of gravity of the particles suspended in the water. Sedimentation can take place in any body of water. The cost of water treatment by sedimentation process is relatively inexpensive because it does not require mechanical equipment and the addition of chemicals. Usefulness for reducing sedimentation of suspended materials (turbidity) of the water and can also serve to reduce the content of organisms (pathogens) in air.cara particular is commonly used to filter water PVC tube

3. Using chemicals. Many types of chemicals that can be used to reduce iron. But we will not discuss it here because it must use the dose and particular method and measuring different depending on how high the iron in the water.

4. Mechanical Filtration (Filtration) This method proved to be the most effective and powerful because it has been proven unfounded so research can be justified, in the modern needs like this technique filters, purifiers, water filters are very effective and efficient. Efficient time, cost and outcomes.

 

 This is how we choose to CV FERRO WATER present in the business of procurement of equipment water treatment and drinking water. Many brands filter water filter in Indonesia all depending on quality, price-sales service. CV FERRO WATER used active best carbon media that serves to neutralize the substance levels of iron and manganese in the water. Absorption system to 100%. Media active carbon is more than the above level media market such as activated carbon coal, manganese greensand, zeolite, silica, sand active, Calgon, or alkali. Price number two but the quality is number one. Please contact us for more information, please visit our workshop.